Zero-Maintenance Black Metal Privacy Fence Kit — Complete System

Everything You Need to Build the Last Fence You'll Ever Own

The BarrierBoss Metal Privacy Fence Kit is a complete all-steel system — steel posts, framed steel panels, top and bottom rails, U-channels and hardware all in one shipment. Pick your size (4×6 up to 8×8), profile (7/8" Corrugated or Deep Groove/Ribbed), and colour (Midnight Black, Coastal Gray, Coffee Brown, or Corten Steel). Backed by a 40-year warranty, shipped factory-direct, and delivered curbside with our own crane trucks.

How many posts do I get? Every section includes one steel post, and every order ships one extra end post to close your run — order 1 section and you get 2 posts, order 20 sections and you get 21 posts. Corners and gate openings may need an extra post; tell us your layout in the cart notes and we’ll confirm.

What's Included in the Kit

Each Metal Privacy Fence Kit ships with every component needed to build one fence run between two posts. No cutting, no welding, no sourcing parts from three different suppliers:

• 1× Steel Post — sized to your panel height (4ft, 5ft, 6ft, 7ft, or 8ft tall), 2.38 mm wall thickness, pre-drilled brackets included
• 1× Steel-Framed Panel — 2 mm welded frame, 26-gauge galvanized steel infill with DualCoat finish, same color both sides
• Top & Bottom Rails — match panel width, slot into U-channels
• U-Channels — lock the panel infill securely into the frame so corrugated sheets can't slip or rattle
• Carriage Bolts + Hardware — full bolt and nut set for post-to-rail connections
• Illustrated Install Guide — step-by-step, no welding required

Total components per kit: 1 steel post (+1 extra end post with every order) + 1 framed panel + 2 rails + 2 U-channels + bolt set — order 20 kits, receive 21 posts. 1 post + 1 framed panel + 2 rails + 2 U-channels + bolt set. For a 50 ft fence run, plan ~7 kits (depending on panel width). For 100 ft, ~13 kits.

Kit Sizes — How Much Fence Each Kit Covers

Available in 10 sizes from 4 ft × 6 ft to 8 ft × 8 ft. Wider panels cover more fence per kit; taller panels give more privacy. The most popular residential choice is 6 ft × 8 ft.

Quick estimator: 25 ft run = ~4 kits · 50 ft = ~7 kits · 100 ft = ~13 kits · 200 ft = ~26 kits (assuming 8 ft wide panels). Tell us your linear footage in the cart notes and we'll confirm the exact count plus a corner-post add-on if needed.

DIY Install — Difficulty & What You'll Need

Skill level: intermediate DIY. If you've installed a wood fence or planted a tree, you can install this kit. No welding, no special tools, no cutting required.

• Tools: post-hole digger or auger rental, 4 ft level, cordless drill, socket wrench, measuring tape
• Time: ~1–2 panels per hour after the first post is set. A 50 ft run is a weekend project for two people.
• Concrete: recommended but not required — direct-bury works for most soil types; concrete adds long-term stability in soft soil or high-wind zones
• Permits: check your municipality for height restrictions; most residential zones allow 6 ft without a permit

Every kit ships with an illustrated install guide.

Metal Privacy Fence Kit Cost

Kit prices range from $474.99 to $774.99 per kit depending on size, panel profile, and finish. Per-linear-foot cost is significantly lower than cut-and-build alternatives — no labour to source materials, no fabrication overhead, factory-direct shipping.

• Smallest kit (4 ft × 6 ft, 7/8" Corrugated, Black): $474.99 ≈ $79 per linear foot
• Most popular (6 ft × 8 ft, 7/8" Corrugated, Black): $624.99 ≈ $78 per linear foot
• Largest kit (8 ft × 8 ft, Deep Groove, Corten Steel): $774.99 ≈ $97 per linear foot

Save 10% on the entire order when you pay by ACH bank transfer. On-property delivery and unloading included by our own crane trucks — no extra freight charge.

Engineered for Strength, Style, and Longevity

The BarrierBoss Metal Privacy Fence Kit is built for homeowners and property managers who demand strength without compromise. Each prefab steel panel has a thickness of 26 gauge. Every component is hand-welded, galvanized, and sealed for a finish that resists rust, fire, and storm-force winds.

Wondering if this all-metal system can handle coastal or hurricane-prone areas? Yes — hurricane-tested panels thrive in humid, salty, and windy environments. Concerned about maintenance? You'll appreciate that this system requires zero upkeep — no warping, no cracking, no repainting.

Want flexibility? The kit accepts any infill up to 1 inch thick, so you can swap your panels for a custom finish or mixed-material design later without major modifications.

Built for FireSmart® Zones

Non-combustible steel construction makes this kit the right answer for wildfire-prone properties. The system is rated California Zone 0 and Colorado WRC compliant — meeting the strictest fire-resistant fencing requirements in North America. If you're in a designated wildfire-urban-interface zone, this is one of the only complete fence kits on the market that meets code.

Features & Benefits

• Complete kit — posts, panels, rails, U-channels, bolts: everything included, nothing to source separately
• 10 size options from 4×6 (garden) to 8×8 (maximum privacy)
• 4 colours — Midnight Black, Coastal Gray, Coffee Brown, Corten Steel patina
• 2 panel profiles — 7/8" Corrugated or Deep Groove/Ribbed
• 26-gauge galvanized steel with DualCoat finish, same color both sides
• 40-year warranty against rust, fade, and corrosion
• FireSmart® rated — California Zone 0 and Colorado WRC compliant
• on-property delivery + unload included by our own crane trucks
• Save 10% by ACH bank transfer at checkout

Related Guides

• FireSmart Metal Fencing: How It Protects Homes in Wildfire Country
• Built to Brave the Blaze: Why Metal Fencing Doesn't Back Down

Shop the Look

• Matching Metal Fence Gate
• Browse All Metal Fence Kits & Variants

Technical Specifications